Skip to content
Speaker Tester

Low mids · Audiogram

250 Hz Test Tone

250 Hz is the lowest frequency on a standard hearing test chart and sits in the low midrange that gives voices and instruments their body. Use it to compare ears, speakers and channels.

  • Free
  • No download
  • No sign-up
  • Audio stays on your device

Loading…

Test tone

250Hz

B3 +21 cents · Sine wave

Waveform
Output

Sine is the pure test tone. Square, triangle and sawtooth add harmonics above 250 Hz, which makes rattles and distortion easier to hear.

20%

Start quiet. Lower your device volume before you press play, then raise it slowly. Test tones are pure and can be louder than music at the same setting.

250 Hz on a hearing test

A clinical audiogram usually tests 250, 500, 1000, 2000, 4000 and 8000 Hz, sometimes with 3000 and 6000 Hz in between. 250 Hz represents the low end of speech. Hearing at this frequency is often preserved even when high frequencies fade with age, but some conditions, such as Ménière’s disease, typically affect the low frequencies first.

This page can’t measure your hearing, because it doesn’t know how loud your headphones are. It can, however, show a clear difference between ears: play the tone at a quiet level, switch between Left and Right, and if one side is much fainter with headphones you trust, mention it to a doctor or audiologist.

Boxy and cardboard sound

Middle C is 261.6 Hz, so 250 Hz is close to the middle of the piano. Too much energy around 250–400 Hz gives speakers a boxy or “cardboard” quality, as if the sound is coming out of a box. Cheap speaker cabinets often resonate in this range.

Play the tone and gently put your hand on the speaker cabinet. A strong vibration in the side panels means the box itself is singing along, which colours everything you listen to. Heavier stands, a more solid shelf or rubber feet can help.

Frequently asked questions

Can this 250 Hz tone test my hearing?

Not accurately, because the actual loudness depends on your device. It can reveal a clear difference between ears, which is worth checking with a professional.

What note is 250 Hz?

It is between B3 (246.9 Hz) and middle C (261.6 Hz), slightly sharp of B3.

Why do my speakers sound boxy?

Excess energy around 250–400 Hz, often from cabinet resonance or placement in a bookshelf cavity. Pull speakers out of cavities and onto solid stands.

Keep testing

See All Tests

Want to check everything in one go? Run the full speaker test on the homepage.