Skip to content
Speaker Tester

Treble · FM pilot

19 kHz Test Tone (19000 Hz)

Every FM stereo station broadcasts a hidden 19 kHz pilot tone that tells your radio to decode stereo. Few adults can hear it, which makes this tone a stern test of hearing and tweeters.

  • Free
  • No download
  • No sign-up
  • Audio stays on your device

Loading…

Test tone

19kHz

D10 +19 cents · Sine wave

Waveform
Output

Sine is the pure test tone. Square, triangle and sawtooth add harmonics above 19 kHz, though at this pitch most of them are above hearing.

20%

Start quiet. Lower your device volume before you press play, then raise it slowly. Test tones are pure and can be louder than music at the same setting.

The FM stereo pilot tone

FM stereo, standardised in the early 1960s, sends a mono (left plus right) signal for older radios, plus a difference (left minus right) signal shifted up to 38 kHz. A 19 kHz pilot tone, exactly half of 38 kHz, tells receivers that stereo is available and keeps them locked to it. Receivers filter the pilot out, but cheap recordings of FM radio sometimes contain traces of it.

That is why FM audio is limited to about 15 kHz: the space above it is reserved for the pilot.

Hearing and playing 19 kHz

Hearing at 19 kHz is rare beyond the teenage years. If you can’t hear it, that is entirely normal. Many speakers and headphones also struggle this high, and some Bluetooth codecs and lossy files discard it.

If you hear a lower tone, flutter or crackle instead, it is distortion or aliasing in your playback chain, not the 19 kHz tone. Keep the volume low regardless: tweeters can be damaged by continuous high-frequency signals played loudly, and you won’t hear the warning signs.

Frequently asked questions

Why does FM radio use a 19 kHz pilot tone?

It signals that a station is broadcasting in stereo and lets the receiver lock onto the 38 kHz stereo subcarrier.

Can anyone hear 19 kHz?

Some children and teenagers can. Very few adults hear it.

Why do I hear a lower sound instead of 19 kHz?

That is distortion or aliasing from your device or speakers. Lower the volume or try a different output.

Keep testing

See All Tests

Want to check everything in one go? Run the full speaker test on the homepage.